Denver Garage Door Repair Experts. Garage door openers and automatic driveway gate system installation. $79 Garage Door Repair Denver

Commercial Garage Doors

If you’re a commercial facility and you have a problem with your garage door or need an install, call Colorado Premier Garage Doors for the best installation rates and garage door repair service in the Denver metro area. We are an authorized distributor of all commercial grade garage door brands so we can provide you with exactly what you need for your facility.

Check out our Commercial Garage door photo gallery Here

 

 

 

Commercial Grade – Ribbed Steel Doors

SECTIONS Roll-formed steel sections are 2″ thick, hot-dipped and galvanized with a baked-on polyester finish Sections are available in: 20 GAUGE white 24 GAUGE white, brown, silver, and sandstone 26 GAUGE white Stiles are box-shaped and galvanized Section joints are tongue-and-groove Inside stiles are made of galvanized steel and stile holes are “dimpled” for increased holding power Bottom astragal is “U” type with an aluminum retainer Stiles are face-riveted vs. glued

TRACKS Tracks are 2″ or 3″, as specified Available in bracket mount, angle mount, clip angle mount, 12″ radius, 15″ radius, high lift, vertical lift, follow roof line, or dual track low head room

HARDWARE Package includes 11 GAUGE or 14 GAUGE hinges, as specified 2″ or 3″ long-stem or short-stem steel rollers with 10 ball bearings Heavy duty adjustable top roller brackets

SPRINGS Torsion springs are helically wound with oil-tempered wire All springs are individually calibrated for each door All tubes are galvanized for rust resistance

INSULATION TYPE Polystyrene with high impact vinyl back cover Polystyrene with 27 GAUGE steel back cover Stiles include special clips to hold insulation retainer in position Insulated doors have an R-value of 6.81

 

Micro-Grooved Sandwich Doors

SPECIFICATIONS SECTIONS Features four evenly spaced micro-grooves that run horizontally across each section. Double sided steel doors are 26 GAUGE front and 27 GAUGE back for sturdiness Concealed steel plates run continuously from top to bottom of each section for fastening hardware Section joints are tongue-and-groove White painted end stiles

TRACKS Tracks are 2″ or 3″, as specified Available in bracket mount, angle mount, clip angle mount, 12″ radius, 15″ radius, high lift, vertical lift, follow roof line, or dual track low head room

HARDWARE Package includes 11 GAUGE or 14 GAUGE hinges, as specified 2″ or 3″ long-stem or short-stem steel rollers with 10 ball bearings Heavy duty adjustable top roller brackets

SPRINGS Torsion springs are helically wound with oil-tempered wire All springs are individually calibrated for each door All tubes are galvanized for rust resistance

INSULATION TYPE Environmentally safe CFC-free, polystyrene core Polystyrene insulation is secured in place with a urethane adhesive to increase structural integrity R-value – 8.72

 

CHI Commercial Polyurathane

SPECIFICATIONS

Polyurethane Thermal Doors, Model 3216 – R-Value: 14.3*

Foamed-in-place polyurethane core permanently bonds the 26 gauge face and back steel to form a rigid homogeneous section

2” thick sections are thermally broken to eliminate convection

Tongue and groove meeting rails with joint gasketing provide superior joint strength and prevent air infiltration

Concealed hinge attachment plates run the full height of sections for superior strength

Rigid exterior end stiles are finish painted white

Glass is available in 7/16” insulated or 1/4” tempered glass

Glass is easily replaced or substituted by removing molded frames

Exhaust port is optional for bottom section

Track options include 2” or 3” bracket or clip angle mount and designed to accommodate virtually any headroom design requirements.

Heavy duty hardware may be specified with 11 or 14 gauge hinges and 10 ball rollers

Bottom U-shaped astragal is standard

Increased windload requirements may be specified

Available in finish coat colors of white, brown, sandstone and almond

*Calculated in accordance with ASHRAE standard formulas

NWD Commercial Full View Aluminum 800 Series

The 800 Series Industrial Aluminum garage doors are strong, attractive and can provide maximum visibility when required. Fire Stations and Auto Service Centers are two example applications. Door frames come standard with a mill finish, Class II Clear or #602 Bronze Anodized finishes are optional. Standard glass is 1/8″ clear annealed glass. Most other architecturally specified finishes and glass types are available upon request.


CPGD Shield Warranty

Serving the Denver Metro Area

Denver, Westminster, Green Valley Ranch, Boulder, Lone Tree, Castle Pines, Centennial, Arvada, Morrison, Wheat Ridge, Columbine Valley, Golden, Lafayette, Thornton, Littleton, Aurora, Englewood, Northglenn, Castle Rock, Greenwood Village, Commerce City, Parker, Highlands Ranch, Cherry Hills Village, Louisville, Broomfield, and Lakewood, CO.

Call Today: 303-458-5600